4' VHF/AIS White Antenna with 15' Cable The 594-MW is one antenna designed for the best performance on VHF and AIS signals. To ensure the most incredible AIS and VHF range, Digital Antenna’s new 4.5dB gain AIS/VHF antenna features a less than 1:5:1 SWR on both the VHF (156MHz) and AIS (162MHz) frequencies. Digital VHF radio-based transponder systems need antennas designed for digital signals. Digital Antenna is the only manufacturer to design all antennas to maintain and maximize digital signals for the best transmit and receive range. Ideal for use on any size commercial or recreational vessel. Perfect for use with combined VHF/AIS radios. Factory-installed mini-UHF connector (less than 3/8” OD) and included PL259 adapter make a quick and secure connection to the radio. (no soldering needed). Features: Designed for Digital AIS/VHF signals 4.5dBi Omni-directional gain Rugged fiberglass rod with UV stable finish Secure soldered connections 316 stainless steel base 1”x14 female threaded base 15’ premium low-loss RG-8X cable Factory-installed mini-UHF connector 5-year warranty Specifications: Radiation: Pattern Omni-Directional Gain: 4.5dBi Bandwidth: VSWR: < 1.5:1 = 1 56-162.5 MHz (6.5MHz) Cable: 15’ Digital Antenna exclusive low loss RG-8X Impedance: 50 ohms Max Input Power: 50 watts Exterior Finish: White polyurethane high gloss UV stable Dimensions: 4’ length x 1” OD taper Weight: 1.7 lbs RF Connector: Mini-UHF female with included PL259 adapter Installation: 1”x14tpi female threaded base Elements: Brass - Hand soldered Polarization: Vertical Wind Rating: >160KPH Operating Temp: 30º F to +175º F Warranty: 5 Years Compliance: Automatic Identification System (AIS) Use with all AIS class A and B transceivers, AIS transponders, Smart AIS transponders, AIS receivers, auxiliary civil services, multi-use radio service (MURS), 2-way land mobile, VHF marine radio, narrow band FM, VHF SATCOM, Automatic Identification System (AIS), and NOAA Weather Stations. Applications:  Commercial Recreational Government vessels where AIS is required

Airmar DT820BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 20° Tilt Bronze NMEA 2000 Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183M (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Airmar's Smart™ Sensors have embedded microelectronics - the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning. Smart™ Sensor Features Enhanced depth performance Maximum Depth Range: 180M (594') Minimum range 0.5M (1.6') Urethane face provides better sensitivity Excellent high-speed performance Fixed 20° tilt for 16° to 24° deadrise Fixed 12° tilt for 8° to 15° deadrise Fixed 0° tilt for 0° to 8° deadrise NMEA 2000 output 100 W RMS power Frequency: 235 kHz Cone: 12° All models have depth and temperature 235 kHz eliminates interference with fishfinders Retractable insert provides ease of serviceability Usable Shaft Length: 57mm (2.25") .6M(19.8') NMEA 2000® devicenet cable and connector 51mm (2") housing Blanking plug included Accommodates maximum hull thicknesses 54mm (2-1/8") Accommodates minimum hull thicknesses 6.3mm (0.25") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Airmar DT812BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 12° Tilt Bronze NMEA 2000 Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183M (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Airmar's Smart™ Sensors have embedded microelectronics - the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning. Smart™ Sensor Features Enhanced depth performance Maximum Depth Range: 180M (594') Minimum range 0.5M (1.6') Urethane face provides better sensitivity Excellent high-speed performance Fixed 20° tilt for 16° to 24° deadrise Fixed 12° tilt for 8° to 15° deadrise Fixed 0° tilt for 0° to 8° deadrise NMEA 2000 output 100 W RMS power Frequency: 235 kHz Cone: 12° All models have depth and temperature 235 kHz eliminates interference with fishfinders Retractable insert provides ease of serviceability Usable Shaft Length: 57mm (2.25") .6M(19.8') NMEA 2000® devicenet cable and connector 51mm (2") housing Blanking plug included Accommodates maximum hull thicknesses 54mm (2-1/8") Accommodates minimum hull thicknesses 6.3mm (0.25") This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DT800 NMEA 2000 Thru-Hull Tilted Element Smart Sensor - 20° Function: Depth / Temperature, Material: Plastic, Fixed Tilt Angle: 20° Frequency: 235 kHz, Cone: 12°, Power: 100 Watts RMS Connector: 5-Pin NMEA 2000 Features: Low-profile, retractable, thru-hull transducer offers depth and temperature functions in a single, compact housing Tilted Element Transducer – unique design tilts ceramic element inside transducer housing, giving all the advantages of a fairing block without a hull protrusion Available in fixed 0°, 12° or 20° tilt – perfect for power and sail boat applications Low-profile housing compensates for hull deadrise, does not affect hull performance and provides accurate readings at high speeds Designed with Airmar's exclusive Broadband Ceramic Technology, 235 kHz element improves resolution without sacrificing sensitivity Smart™ Sensor with embedded microelectronics – transducer element and signal processor are only millimeters apart 235 kHz frequency prevents mutual interference with other echo sounders on vessel Retractable housing with self-closing valve minimizes water flow into the vessel when transducer is removed for servicing Specifications: Mount: Thru-hull Fixed Element Tilt Angle: 20° (for 16° - 24° hull deadrise) Housing Material: Plastic Connector: 5-pin NMEA 2000® Cable Length: 20 ft. Frequency: 235 kHz Cone: 12° Power: 100 Watts RMS Depth Sensor Range: 1.6 - 594 ft. Acoustic Window Material: Urethane Compatible Hull Materials: Fiberglass or metal Hole Diameter for Installation: 2" Dimensions: 4.92" H x 2.94" OD This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12° Tilt - NMEA 2000 - 6M Cable Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz transducers on-board with no interference. The broadband ceramic delivers depth readings to 183 m (600'), as well as accurate shallow-water readings in as little as 500 mm (1.6'). Available in fixed 0°, 12°, or 20° tilt, the DT800 is perfect for power and sailboat applications. It is sold with a choice of rugged housings— plastic, bronze, or stainless steel—to accommodate any vessel type or hull material. These low-profile housings do not affect hull performance and will provide accurate readings at high speeds. Airmar's Smart™ Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible device or display. Because the ceramic is tilted inside the housing, the transducer beam is oriented straight down, resulting in strong bottom echo returns and accurate depth readings. The retractable housing with a self-closing valve reduces water flow into the vessel when the transducer is removed for cleaning. Smart™ Sensor Features Broadband ceramic available with 0°, 12° and 20° tilt options Enhanced depth performance Maximum Depth Range: 180M (594’) Minimum range 0.5M (1.6’) Urethane face provides better sensitivity Excellent high-speed performance Fixed 12° tilt for 8° to 15° deadrise NMEA 2000 output 100 W RMS power Frequency: 235 kHz Cone: 12° All models have depth and temperature 235 kHz eliminates interference with fishfinders Retractable insert provides ease of serviceability Usable Shaft Length: 57mm (2.25”) 6M(19.8”) NMEA 2000® devicenet cable and connector 51mm (2”) housing Blanking plug included Accommodates maximum hull thicknesses 54 mm (2 1/8”) Accommodates minimum hull thicknesses 6.3 mm (0.25”) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Series 301-006 - Double Stacked Stern Light - 2NM - Vertical Mount - White - Silver Housing Lopolight started out back in 2004, offering many solutions and neat combinations for all size boats and yachts. The tradition continues.  Lopolight offers a full range of navigation lights dedicated for boats and yachts, resulting in an elegant,  compact and precise solution with good value for money.   Features: Double Light - Stern Technical Specifications: Visibility - 2NM Vessel size - Up to 164' (Up to 50M) Operating Voltage - 10 - 32 VDC Number of LED Bulbs - 2 Light Color - White Mounting - Vertical Materials - Anodized aluminum Connection - 8.2' (2.5M) cable IP rating - IP68 Weight - 34.21oz  Certifications: U.S.C.G. EN14744 COLREG72 In the Box: Navigation light w/8.2' (2.5M) cable Mounting hardware Installation guide *Sold as an Individual

MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 26' MACH14 - Current BRP® (OMC®) style (like C14) MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement. Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required. Mach Series cables also feature solid stainless steel output fittings. The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables. The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility. Features: Suitable for outboard – inboard and sterndrive engines High efficiency for smooth operation High flexibility for reduced bend radius Ideal for long complex cable routing Maintenance free Stainless steel cables end fittings Blue outer jacket resists against abrasion, UV and chemicals

Door Stop & Catch - Brass - 2"  The Sea-Dog® Door Stop and Catch holds the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release. Constructed of sand cast brass with a plain polished or chrome plated finish. These door stops are both decorative and functional. Installs with five #6 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Series 301-008 - Starboard Sidelight - 2NM - Horizontal Mount - Green - Black Housing Lopolight started out back in 2004, offering many solutions and neat combinations for all size boats and yachts. The tradition continues.  Lopolight offers a full range of navigation lights dedicated for boats and yachts, resulting in an elegant,  compact and precise solution with good value for money.   Features: Single Light - Starboard Technical Specifications: Visibility - 2NM Vessel size - Up to 164' (Up to 50M) Operating Voltage - 10 - 32 VDC Number of LED Bulbs - 1 Light Color - Green Mounting - Horizontal Materials - Anodized aluminum Connection - 8.2' (2.5M) cable IP rating - IP68 Weight - 22.57oz  Certifications: U.S.C.G. EN14744 COLREG72 In the Box: Navigation light w/8.2' (2.5M) cable HDPE Circular Baseplate Mounting hardware Installation guide *Sold as an Individual

Series 301-008 - Starboard Sidelight - 2NM - Horizontal Mount - Green - Silver Housing Lopolight started out back in 2004, offering many solutions and neat combinations for all size boats and yachts. The tradition continues.  Lopolight offers a full range of navigation lights dedicated for boats and yachts, resulting in an elegant,  compact and precise solution with good value for money.   Features: Single Light - Starboard Technical Specifications: Visibility - 2NM Vessel size - Up to 164' (Up to 50M) Operating Voltage - 10 - 32 VDC Number of LED Bulbs - 1 Light Color - Green Mounting - Horizontal Materials - Anodized aluminum Connection - 8.2' (2.5M) cable IP rating - IP68 Weight - 22.57oz  Certifications: U.S.C.G. EN14744 COLREG72 In the Box: Navigation light w/8.2' (2.5M) cable HDPE Circular Baseplate Mounting hardware Installation guide *Sold as an Individual

5/8" Double Braid Dock Line - Blue with Tracer - 35'  Double Braid Nylon has superb handling and is the perfect combination of high-grade marine nylon, special torque balanced construction and a unique stabilization process, which produces this long wearing line that resists kinking. Applications: Dock line - ≤55' (16.8 M) vessel Mooring line - ≤ 30' (9.1 M) vessel  Technical Specifications: Color - Blue with tracer Material -  Double braid nylon  Rope Diameter - 5/8" (16mm) Rope Length - 35' (10.7 M) Tensile Strength - 13,100 lb *Sold as an Individual

BP-5 Poly Basket - 2.6" x 9.4" Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in length, and from 1.9 to 3.1 inches in diameter. Fits: ARG-1250 SA-1250 VD-1250

Laser Hull Cover  Features & Benefits: OEM Custom Fit Hull cover engineered with features designed for the avid sailor. Durable Ultima™ Fabric - 7.4 oz. solution dyed polyester with clear acrylic undercoating. Two-toned color design with color matched binding. All seams are sewn and top stitched for added strength and durability. Padded corners and reinforcements at critical wear points. All straps and tie-down points are "X" box stitched. Pre-tensioned heavy-duty shock cord with adjustable hooks in the hem for a precise fit. All models with zippers use locking pulls and color-matched backing. Laser Performance Custom thermo-transfer graphic on all covers.

Laser Deck Cover - No Mast  Features & Benefits: OEM Custom Fit Deck cover engineered with features designed for the avid sailor. Durable Ultima™ Fabric - 7.4 oz. solution dyed polyester with clear acrylic undercoating. Two-toned color design with color matched binding. All seams are sewn and top stitched for added strength and durability. Padded corners and reinforcements at critical wear points. All straps and tie-down points are "X" box stitched. Pre-tensioned heavy-duty shock cord with adjustable hooks in the hem for a precise fit. All models with zippers use locking pulls and color-matched backing. Laser Performance Custom thermo-transfer graphic on all covers.

Club 420 Deck Cover - Mast Up Tented  Features & Benefits: OEM Custom Fit Deck cover engineered with features designed for the avid sailor. Durable Ultima™ Fabric - 7.4 oz. solution dyed polyester with clear acrylic undercoating. Two-toned color design with color matched binding. All seams are sewn and top stitched for added strength and durability. Padded corners and reinforcements at critical wear points. All straps and tie-down points are "X" box stitched. Pre-tensioned heavy-duty shock cord with adjustable hooks in the hem for a precise fit. All models with zippers use locking pulls and color-matched backing. Laser Performance Custom thermo-transfer graphic on all covers.