|
Fuel Flow Sensor - 25-500 LPH/6.6-132 GPH
Features:
Operating Temperature: -40°C to 80°C (-40°F to 176°F)
Storage Temperature: -65°C to 170°C (-85°F to 338°F)
Port Size: 1/4" NPT Female
Cable Length: 1M (3.28 ft)
Maximum Viscosity: 1000 cPs
Pressure: 68.95 Bar (1000 PSI)
Strainer Size: 200 Mesh (If not already installed after fuel filter)
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
|
|
Extra Long Grip Mounting Rivets
No. 132
These structural revets are an excellent solution for mounting hardware where you don't have access to the back side of a fastener.
Great for mounting to thin-walled watercraft such as kayaks, these rivets are designed to "butterfly" open to spread the mounting load over a greater area.
10 pieces per package.
|
|
|
Poly-Flex II Styled-to-Fit Cover for 2-3 Seater Personal Watercrafts - 132" X 48" X 44" - Grey
Available in Poly-Flex II®, Sun-DURA® and Sunbrella®. PWC covers come standard with these features:
1/4″ shock cord encased in hem for a snug fit against the hull.
Strong, reinforced tie-down loops sewn into cover.
Package includes (six) tie-down straps
Finished seams – no raw edges
Available in Poly-Flex II® in a grey, Sun-DURA® in a choice of 11 colors and Sunbrella® in a choice of 24 colors.
Poly-Flex II
Good Quality
Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty).
Features:
Construction - Join seams are folded four-ply. No raw edges
Stitching - Double stitch construction for added strength and durability
Weather Resistant - Anti-wick thread throughout construction
Double Reinforced - Tie-down loops sewn into hem
Best Warranty in the Business - Best Warranty in the business based on fabric selection
All Carver Covers are Made in the USA
|
|
|
Flush Mount Kit
Icom MB-132 Stainless Steel Flush Mount Kit for the Icom M424, M506
|
|
|
Set: Strainer FTR1320
This set contains the 2 halves of the strainer for the FTR1320 waterstrainer.
|
|
|
AC Toggle Source Selector (European)
PN: 8132
White Switches
(2) 16A Double Pole Circuit Breakers
Features:
Double pole AC main circuit breakers with installed lockout slide
Prevents connecting both AC sources simultaneously
Maximum panel amperage - 50 Amperes
Red reverse polarity indicating LED
All hot, neutral and safety ground buses installed, fully pre-wired
All circuit label positions are backlit on standard panels - No kit required
"ON" indicating LEDs installed in all circuit positions
MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
Two-part polyurethane slate gray finish
Heavy 1/8" aluminum 5052 alloy
Industry standard height and width
Countersunk mounting holes throughout
=
Detailed installation instructions and cutout template included
Includes set of 30 common Large Format Labels
Over 500 individual labels available
For 230V AC Systems
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
|
|
Tough-Claw Mount w/Self-Leveling Cup Holder
The RAM-B-132-400U consists of the small Tough-Claw base and universal self-leveling drink cup holder. The drink cup holder has two pivot points, allowing for your drink to always stay upright and never spill. Cozy is included with purchase of the RAM-B-132-400U. This mount rotates 360 degrees.
The RAM-B-132-400U includes the RAM Tough-Claw; the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars and flat surfaces. The compact design allows easy installation in a wide variety of applications including motorcycles, kayaks and boats, bicycles, wheelchairs, medical carts and more. The marriage of tool-less removal and a low-profile makes this must have accessory easy to pack with you wherever you go.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Material:
High Strength Composite & Stainless Steel
Note:
The "U" in the part number reflects product packaged in poly bag.
|
|
|
Paneltronics Incandescent Indicator Lights - 5/16 - 14 VDC - Red
Ideal for use as High Visibility Status or Alarm Indicators
Large polycarbonate lens
Black bezel
Nylon housing
Press to fit into 0.312" diameter panel hole
Pigtails are tin plated, 18 gauge, stranded, copper, 6" in length stripped 3/8" (ABYC E-11.12.1.10.)
Optional 5/16" tinnerman nut available (P/N 001-132)
|
|
|
Rescue Swimmer Vest - Fluorescent Yellow/Green/Black - Manual
Hailed as the first rescue swimmer vest to turn a compliance-drive
This vest blends two of Mustang's core competencies - inflatable flotation and foam flotation - to offer a slim profile flotation solution.
Features:
Easy to swim and perform in water when the bladder is inflated
CO2 cylinder storage pocket
Hybrid flotation - foam and inflatable flotation
Left side buckle closure with adjustability on the sides and at the shoulders
Manual CO2 Inflation handle
Constructed with a combination of 500D nylon and 1.5mm neoprene
Oral inflation/deflation valve easily accessible for adjusting buoyancy, and hidden away when not in use
MOLLE system on the front and back for personal configuration of equipment
Compatible with standard MOLLE attachments
MOLLE webbing is designed for knife storage
Technical Specifications:
Color - Fluorescent Yellow/Yellow/Green/Black
Inflation - Manual
CO2 Cylinder size - 16 gram
Size - Universal Adult
Chest Size - 30" to 52" (76 to 132 cm)
Weight Capacity - 80 lb or over (36 kg or over)
*Sold as an Individual
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
|
|
MIT 100 Inflatable PFD - Red - Manual
This front entry manual inflatable PFD has a streamlined design for comfort and safety in calm water conditions. Exclusive Membrane Inflatable Technology (MIT) and durable high tenacity nylon face fabric provide a lightweight and flexible fit.
A manual inflation cord lets you deploy it by hand when needed. The simple 1-fold design makes re-packing a cinch when it comes time to recharge, and safety checks are easy with the inflator inspection window and access flap.
*Upon inflation, it is essential to inspect and re-arm your PFD before next use.
Features:
Front entry with buckle for convenient donning and doffing
High tenacity nylon face fabric is supple and durable
Exclusive Membrane Inflatable Technology (MIT) creates a lightweight, flexible fit
1-fold design is easy to repack
Inflator inspection window and access flap allow for easy safety checks
Inflates via manual inflation cord
Will self-right most wearers (face-up) once inflated
Certifications:
U.S.C.G. - Marine Buoyant Devices 160.076 - Type III Recreational
U.S.C.G. - Marine Buoyant Devices 160.076 - Type V Commercial
Technical Specifications:
Color - Red
Inflation - Manual
CO2 Cylinder Size - 24 gram
Size - Universal Adult
Chest Size - 30" to 52" (76 to 132 cm)
Weight Capacity - ≥ 80 lb (≥36 kg)
*Sold as an Individual
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
|
|
SmartSolar MPPT 150/45 Solar Charge Controller
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulfated or otherwise damaged.
Features:
MPPT - Ultra Fast Maximum Power Point Tracking - By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control - Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or another device via VictronConnect.
Advanced Maximum Power Point Detection in case of partial shading conditions.
Outstanding conversion efficiency.
Natural convection cooling.
Automatic battery voltage recognition.
Flexible charge algorithm.
Over-temperature protection and power derating when the temperature is high.
Technical Specifications:
Dimensions (L x W x H) - 7.3" x 5.2" x 2.8" (186 x 132 x 71mm)
Battery Voltage - 12/24/36/48V
Rated Charge Current - 45A
Max. PV Short Circuit Current - 50A
Maximum Efficiency - 98%
Data Communication Port - VE. Direct
In the Box:
150/45 Solar Charge Controller
Instruction Manual
*Sold as an Individual
Please contact your dealer for any returns, repairs or support issues related to this product.
|
|
|
U-Bolt Pad Eye - 6mm Diameter - 15/64" - 70mm Length - 2-3/4"
Features:
Fully drop forged product with high-quality stainless steel
Outstanding working and breaking loads
For any kind of fastening applications (shrouds, lifelines, blocks...)
Delivered with bolts and counter-plate
Max tightening torque: 7.5 Nm
Applications:
Various fastening applications: shrouds, lifelines, blocks…
Specifications:
Materials: 316L stainless steel grade
Working load: (lb) 2820 / (kg) 1280
Breaking load: (lb) 6610 / (kg) 3000
Weight: (lb) 0.132 / (g) 60
Dimensions:
A: (inch) 1 17/64" / (mm) 32
B: (inch) 1 1/16" / (mm) 27
C: (inch) 1 3/8" / (mm) 35
D diameter: (inch) 15/64" / (mm) 6
Length: (inch) 2 3/4" / (mm) 70
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5
*Sold as an Individual
|
|
|
Black Watertight U-Bolt - 6mm Diameter - 15/64" - 70mm Length - 2-3/4"
Features:
Fully drop-forged product with high-quality stainless steel
Outstanding working and breaking loads
Complete water-tightness thanks to the resistant rubber collar (black color)
Easy installation (no need to use a waterproof sealant)
Delivered with bolts and counter-plate
Max tightening torque: 7.5 nm
Applications:
Various fastening applications: shrouds, lifelines, blocks…
Specifications:
Materials: 316L stainless steel grade
Color: Black
Working load: (lb) 2820 / (kg) 1280
Breaking load: (lb) 6610 / (kg) 3000
Weight: (lb) 0.132 / (g) 60
Dimensions:
Length: (inch) 2 3/4" / (mm) 70
A: (inch) 1 17/64" / (mm) 32
B: (inch) 15/16" / (mm) 24
C: (inch) 1 3/8" / (mm) 35
D diameter: (inch) 15/64" / (mm) 6
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5
*Sold as an Individual
|
|
|
SR Series SAE 6" with Amber Pro Lens - Pair
RIGID’s Amber PRO Edition 6-inch SAE SR-Series is the ultimate combo of street-legal and dust-cutting. Good visibility is a must when out on the trail, over landing, or racing! RIGID's Amber PRO Edition was developed specifically for high dust, smoke, and other low-visibility conditions.
The amber lighting provides superior performance in adverse lighting conditions thanks to the unique attributes of the human eye that make it easier to process light in longer wavelengths. This reduces glare, enhances definition, and improves contrast, allowing you to see farther than traditional white lighting.
The 6-inch SR-Series light bar is a sleek, low-profile light, measures less than 2 Inches tall, and features a single row of LEDs. Protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and a limited lifetime warranty, the SR-Series offers superior build quality with a refined look. RIGID's Amber Pro edition makes it easier than ever to Own The Night.
Features:
Amber PRO Lens
9-36 VDC Operation
Alloy Housing and Heatsink
Reverse Polarity Protection
Over/Under Voltage Protection
IP68 Compliant - Dust/Water Ingress
Pressure Equalizing Vent
Patented Optics
50,000 Hr+ LED Lifespan
Limited Lifetime Warranty
SAE Compliant Lighting
Usable On and Off Road
Specifications:
Size (inch): 6"
Weight (Lbs): 1.60
Optics: Spot
Watts: 40
Amp Draw: 2.9
Raw Lumens: 3240
Lux at 10m: 132.7
Beam Distance at 1Lux: 115.2
Beam Distance at .25Lux: 230.4
Peak Beam Intensity(cd): 13267
Product Comes With:
(2) 6 Inch SR-Series PRO SAE J583 with Amber PRO lens
Harness and switch
Surface Mount Brackets
Hardware
*Sold as a pair (two lights total)
|
|
|
PT-24-13W Battery Charger
“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.
A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.
Features:
24-volt model
“Smart” circuitry provides three-stage charging – bulk, absorption, float
Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
Multiple isolated output banks; ammeter indicates total output current
The optional sensor adjusts output voltage based on battery temperature
Current limiting prevents damage from overloading
Use as a power supply; can power loads without a battery in line
Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
Install in conjunction with PT-MCU for additional control and monitoring
ABS-type approval for battery charging and power supplies
Specifications:
Input VAC (50-60 Hz.): 90 – 132, 180 – 264
Input Amps @ Full Load: @ 115 VAC: 6.5, @ 230 VAC: 4
Power Factor: .7
Max Output Amps: 13
Output Banks: 3
Battery Capacity (Amp-Hours): 26 – 130
Operating Temp. Rating Reference: T-2
Case Size Reference: A-1
Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (28.4A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth
Weight Lbs./Kg: 8/4
Optional Temp. Sensor Model: TCS-12/24
Remote Panel Model: RP
Compliance Reference: CG, ABS
Temperature Rating References:
Temperature: -10 degrees C to +60 degrees C
Derate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C
Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation):
Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load
Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load
Compliance References:
UL: UL 1950 (per DNB report)
CG: USCG CFR 183.410 (Ignition protected)
EN: EN 60335-1
CE: Carries the CE mark
ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.
Options:
Remote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
|