|
Grand Slam 2801 Outrigger Top Mount
The GS-2801 is the 4th generation of the top mount that sets the standard in the industry. Its rugged design will provide years of reliable service even in the most challenging saltwater applications. The redesigned locking head provides secure outrigger height positioning using TACO's spline lock technology which provides a positive lock with minimal parts for increased reliability. TACO's further enhanced the rotator lever to provide a sleek and ergonomic shape, using polished Stainless Steel and UV-resistant non-slip Santoprene. The GS-2801 features an off-set handle.
Features
For use on 20'-36' fishing boats
Fits both hardtop and soft top applications
Designed to fit the industry standard TACO Outrigger-Ready Mounting Plate
Rugged stainless steel and anodized aluminum construction
12 locking fishing positions
Uses TACO's spline lock technology for secure outrigger elevation
Ergonomic shaped rotator lever
Polished 316 Stainless Steel arm assembly and lever
Brushed anodized aluminum body
Top-mounted
4" x 6" mounting base
Compatible with TACO Metals 1-1/2" heavy-duty Telescoping TeleOutriggers
Fits TACO Metals Clamp-On Mounting Plates
Sold in pairs
|
|
|
Orion-TR Isolated DC-DC Converter - 24 VDC to 24 VDC - 280W - 12AMP
Remote On/Off Terminal
The remote on/off terminal eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or for example the engine run/stop switch.
All Models Are Short Circuit Proof and Can Be Paralleled to Increase Output Current
An unlimited number of units can be connected in parallel.
High Temperature Protected
The output current will reduce at high ambient temperatures.
IP43 Protection
When installed with the screw terminals oriented downward.
Screw Terminals
No special tools are needed for installation.
Input Fuse (not replaceable)
On 12 V and 24 V input models only.
Adjustable Output Voltage
Not intended for battery charging ( consider using an Orion-Tr Smart for battery charging).
Specifications:
Input Voltage Range: 16-35 V
Under Voltage Shut Down: 14 V
Under Voltage Restart: 15 V
Nominal Output Voltage: 24.2 V
Output Voltage Adjust Range: 20-30 V
Output Voltage Tolerance: +/- 0,2 V
Output Noise: 2 mV rms
Cont. Output Current at Nominal Output Voltage and 40 Degrees C: 12 A
Maximum Output Current (10 S) at Nominal Output Voltage: 15 A
Short Circuit Output Current: 30A
Cont. Output Power at 25 Degrees C: 320 W
Cont. Output Power at 40 Degrees C: 280 W
Efficiency: 89 %
No Load Input Current (2): < 80 mA
Current Consumption: < 200uA when disabled via its remote port
Galvanic Isolation: 200 VDC between input, output, and case
Operating Temperature Range: -20 to +55 Degrees C (derate 3 % per °C above 40 °C)
Humidity: Max. 95 % non-condensing
DC Connection: Screw terminals
Maximum Cable Cross-Section: 16 mm² AWG6
Weight: 1,3 kg (3 lb)
Dimensions (H x W x D): 130 x 186 x 70 mm (5.1 x 7.3 x 2.8 inch)
Safety Standards: EN 60950
Immunity Standards: EN 61000-6-2, EN 61000-6-1, EN 55014-2
Automotive Directive Standards: ECE R10-5
Please contact your dealer for any returns, repairs or support issues related to this product.
|
|
|
Grand Slam 280 Outrigger Top Mount
The GS-280 is the 4th generation of the top mount that sets the standard in the industry. Its rugged design will provide years of reliable service even in the most challenging saltwater applications. The redesigned locking head provides secure outrigger height positioning using TACO's spline lock technology which provides a positive lock with minimal parts for increased reliability. TACO's further enhanced the rotator lever to provide a sleek and ergonomic shape, using polished Stainless Steel and UV-resistant non-slip Santoprene.
Features
For use on 20'-36' fishing boats
Fits both hardtop and soft top applications
Designed to fit the industry standard TACO Outrigger-Ready Mounting Plate
Rugged stainless steel and anodized aluminum construction
12 locking fishing positions
Uses TACO's spline lock technology for secure outrigger elevation
Ergonomic shaped rotator lever
Polished 316 Stainless Steel arm assembly and lever
Brushed anodized aluminum body
Top-mounted
4" x 6" mounting base
Compatible with TACO Metals 1-1/2" heavy-duty Telescoping TeleOutriggers
Fits TACO Metals Clamp-On Mounting Plates
Sold in pairs
|
|
|
Marine Air Blower 280 Flange - 12V
3″ flange mounted marine ventilation 12V radial blower with capacity 280 m3 per h, 163 CFM. Inlet 72mm, outlet 72mm. Body in hermoplastic PA6 high durable white Nylon with integrated blower motor.
Features:
Weight: 0.88 kg/1.5 lbs
Dimensions: 200/7.87L x 165/6.6H x 195/7.7W mm/in
3" Flange
3,8A fuse
Interchangeable with Jabsco 34739-0010, Johnson Pump 80-47416-01
CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)
|
|
|
Air Blower 280 Flange - 24V
3″ flange mounted marine ventilation 24V radial blower with capacity 280 m3 per h, 163 CFM. Inlet 72mm, outlet 72mm. Body in hermoplastic PA6 high durable white Nylon with integrated blower motor.
Features:
Weight: 0.88 kg/1.5 lbs
Dimensions: 200/7.87L x 165/6.6H x 195/7.7W mm/in
Type: 3" Flange
2A fuse
Interchangeable with Jabsco 34739-0020, Johnson Pump 80-47416-02
Certification: CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)
|
|
|
Kensaki 280 Jig - 7.25" - 9-7/8oz - Silver Pink Zebra
The asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.
Specifications:
Color: Silver pink zebra
Length: 7.25 in.
Size: 280
Weight: 9-7/8 oz
|
|
|
Kensaki 280 Jig - 7.25" - 9-7/8oz - UV Chartreuse Glow Zebra
The asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.
Specifications:
Color: UV chartreuse glow Zebra
Length: 7.25 in.
Size: 280
Weight: 9-7/8 oz
|
|
|
Kensaki 280 Jig - 7.25" - 9-7/8oz - UV Green Sardine Zebra
The asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.
Specifications:
Color: UV green sardine zebra
Length: 7.25 in.
Size: 280
Weight: 9-7/8 oz
|
|
|
Kensaki 280 Jig - 7.25" - 9-7/8oz - UV Silver
The asymmetrical Kensaki cuts water fast with its knife-tip design, allowing it to get deep. The "in line" eyelets stabilize the jig during descent and enhance the fluttering action under the slack line. Use a ‘lift and fall’ slow-pitch technique to get the Kensaki darting aggressively upwards during the lift, followed by a very tight horizontal flutter on the fall.
Specifications:
Color: UV silver
Length: 7.25 in.
Size: 280
Weight: 9-7/8 oz
|
|
|
280 Bait Caster / Spinning Rod Holder
Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.
Includes No. 241 combination deck or side mount.
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
|
|
Volvo 280 Anode Kit
Contents:
(1) 00703
(1) 00707
Material: Zinc
Packaging: Polybag
Hardware: Included
|
|
|
Volvo 280 Anode Kit
Contents:
(1) 00703AL
(1) 00707AL
Material: Aluminum
Packaging: Polybag
Hardware: Included
|
|
|
Volvo 280 Anode Kit
Contents:
(1) 00703MG
(1) 00707MG
Material: Magnesium
Packaging: Polybag
Hardware: Included
|
|
|
Volvo Duo-Prop 280 Anode Kit
Contents:
(1) 00707
(1) 00704BIS
Material: Zinc
Packaging: Polybag
Hardware: Included
|
|
|
Volvo Duo-Prop 280 Anode Kit
Contents:
(1) 00707AL
(1) 00704BISAL
Material: Aluminum
Packaging: Polybag
Hardware: Included
|
|