xSonic P319 Plastic Low Profile TH 50/200 9-Pin 600W Connector - 10M Cable The P319 is a compact, plastic, thru-hull, dual-frequency (50/200 kHz) sensor that offers depth and temperature data. Ideal for planing hull powerboats and sailboats. Depth/Temperature Requires just one hole in the hull to receive data for both depth and temperature Dual Frequency Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water Highly Accurate Provides extremely accurate data Low Profile Just 5mm extends outside of the hull Specifications: Frequency: 50/200 kHz Power Rating: 600W Speed Sensor: No Temperature Sensor: No Mounting Style: Plastic Thru-Hull Elements: 1 Beamwidth @ -3dB: 45 (50 kHz) 12 (200 kHz)

Airmar P319 200/50kHz Plastic Thru-hull Transducer (8-pin) 010-10194-21 This plastic thru-hull mount transducer performs well at high speeds. An excellent choice for fiberglass and metal hulls, this 8-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 7 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. Do not use on wood hulls. When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

U-Bolt Pad Eye - 12mm Diameter - 15/32" - 110mm Length - 4-21/64" Features: Fully drop forged product with high-quality stainless steel Outstanding working and breaking loads For any kind of fastening applications (shrouds, lifelines, blocks...) Delivered with bolts and counter-plate Max tightening torque: 60 Nm Applications: Various fastening applications: shrouds, lifelines, blocks… Specifications: Materials: 316L stainless steel grade Working load: (lb) 14100 / (kg) 6400  Breaking load: (lb) 22040 / (kg) 10000  Weight: (lb) 0.703 / (g) 319  Dimensions: A: (inch) 1 47/64" / (mm) 44  B: (inch) 1 11/32" / (mm) 34  C: (inch) 1 31/32" / (mm) 50  D diameter: (inch) 15/32" / (mm) 12  Length: (inch) 4 21/64" / (mm) 110  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual

Quattro-II - 24/3000 - 70-50/50 - 2X 120V Similar to the MultiPlus-II 2x120V, the Quattro-II 2x120V is a combined inverter and charger specifically designed for standard North American 50A 120/240VAC split-phase applications. Additionally, it can accept two AC inputs and automatically connect to the active source. 120/240V Input and Output, or 120V Input and Output (Always 120V Output When in Inverter Mode) The two AC inputs can be supplied from a split-phase 120/240V source or a single-phase 120V source. When one of the AC sources is available, the Quattro will feed through the AC to its output. The output will therefore mirror the AC input. The inverter/charger connects to the neutral and the preferred input line (L1). The power needed to charge the batteries will therefore be drawn from L1. The Quattro switches to inverter operation when no AC source is available. The inverter output is 120V single-phase. In invert mode, the Quattro connects both output lines (L1 and L2) together to provide 120VAC to loads on either line. Any 240V loads will therefore be supplied only when the Quattro is supplied by a split-phase AC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery. PowerControl and PowerAssist - Boosting the Capacity of the Grid or a Generator A maximum grid or generator current can be set. The Quattro will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is often required only for a limited period, the Quattro will compensate for insufficient generator, shore, or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery (available on L1 input only). Two AC Inputs and Two AC Outputs The Quattro can be connected to two independent AC sources, for example,shore-side power and a generator, or two generators. The Quattro-II will automatically connect to the active source. The main output has no-break functionality. The Quattro takes over the supply to the connected 120V loads in the event of a grid failure or when shore/generator power is disconnected. The transfer time of the L1 output is less than 18 milliseconds, so computers and other electronic equipment will continue to operate without disruption. The transfer time of the L2 output is longer: approximately 40 milliseconds. The second (auxiliary) output is live only when AC is available on the input of the Quattro. Loads that should not discharge the battery can be connected to this output. Virtually Unlimited Power Thanks to Parallel and Three-Phase Operation Up to 6 Quattros can operate in parallel to achieve a higher power output. In addition to parallel connections, three units of the same model can be configured for three-phase output. In multi-phase setups, L2 is disabled on all units. On-Site System Configuring, Monitoring and Control Settings can be changed in a matter of minutes with the VictronConnect app or VEConfigure software (computer or laptop and MK3-USB interface are needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, and Digital Multi Control Panel. Remote Configuration and Monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Specifications: PowerControl & PowerAssist: Yes (on L1 input) Transfer Switch: 50 A Maximum AC Input Current: 50A (each leg) Inverter Specifications: DC Input Voltage Range: 19-33V Output When in Inverter Mode: Output voltage: 120 Vac ± 2% / Frequency: 60 Hz ± 0.1% (1) Cont. Output Power at 25°C: 3000 VA Cont. Output Power at 25°C: 2400 W Cont. Output Power at 40°C: 2200 W Cont. Output Power at 65°C: 1700 W Maximum Apparent Feed-in Power: 2500 VA Peak Power: 5500 W Maximum Efficiency: 94% Zero Load Power: 11W Zero Load Power in AES Mode: 8W Zero Load Power in Search Mode: 4W Charger Specifications: AC Input: Split-phase: 180-280Vac 45 – 65Hz / Single-phase: 90-140Vac 45 – 65Hz Charge Voltage 'Absorption': 28.8 V Charge Voltage 'Float':  27.6 V Storage Mode: 26.4 V Maximum Battery Charge Current: 70 A Battery Temperature Sensor: Yes General Specifications: Auxiliary Output: 50 A (each leg) External AC current Sensor (optional): 100A Programmable Relay: Yes Protection: a – g VE.Bus Communication Port: For parallel and three-phase operation, remote monitoring and system integration General Purpose com. Port: Yes, 2x Remote On-Off: Yes Operating Temperature Range: -40 to +65°C (-40 -150°F) Fan assisted cooling Humidity (non-condensing): Max 95% Enclosure Specifications: Material & Color: Steel, blue RAL 5012 Protection Category: IP22 Battery-Connection: 2 M8 bolts 120/240 V AC-Connection: Screw terminals 21 mm² (4 AWG) Weight: 22.5 kg / (50lb) Dimensions (hxwxd): 579 x 319 x 168 mm / (23 x 13 x 7 inch) Standards: Safety: EN-IEC 60335-1, EN-IEC 60335-2-29 Emission, Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Can be adjusted to 50 Hz Protection key: Output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, 120Vac on inverter output, input voltage ripple too high Non-linear load, crest factor 3:1. Up to 75-degrees F / 25-degrees C ambient temperature Switches off when no external AC source is available. Programmable Relay That Can for Example Be Set for General Alarm or DC under Voltage or Genset Start/Stop Function: AC rating: 120Vac / 4A / DC rating: 4A up to 35dc, 1A up to 60Vdc Use, for example, to communicate with a lithium battery BMS Please contact your dealer for any returns, repairs or support issues related to this product.

Quattro-II - 12/3000 - 120-50/50 - 2X 120V Similar to the MultiPlus-II 2x120V, the Quattro-II 2x120V is a combined inverter and charger specifically designed for standard North American 50A 120/240VAC split-phase applications. Additionally, it can accept two AC inputs and automatically connect to the active source. 120/240V Input and Output, or 120V Input and Output (Always 120V Output When in Inverter Mode) The two AC inputs can be supplied from a split-phase 120/240V source or a single-phase 120V source. When one of the AC sources is available, the Quattro will feed through the AC to its output. The output will therefore mirror the AC input. The inverter/charger connects to the neutral and the preferred input line (L1). The power needed to charge the batteries will therefore be drawn from L1. The Quattro switches to inverter operation when no AC source is available. The inverter output is 120V single-phase. In invert mode, the Quattro connects both output lines (L1 and L2) together to provide 120VAC to loads on either line. Any 240V loads will therefore be supplied only when the Quattro is supplied by a split-phase AC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery. PowerControl and PowerAssist - Boosting the Capacity of the Grid or a Generator A maximum grid or generator current can be set. The Quattro will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is often required only for a limited period, the Quattro will compensate for insufficient generator, shore, or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery (available on L1 input only). Two AC Inputs and Two AC Outputs The Quattro can be connected to two independent AC sources, for example,shore-side power and a generator, or two generators. The Quattro-II will automatically connect to the active source. The main output has no-break functionality. The Quattro takes over the supply to the connected 120V loads in the event of a grid failure or when shore/generator power is disconnected. The transfer time of the L1 output is less than 18 milliseconds, so computers and other electronic equipment will continue to operate without disruption. The transfer time of the L2 output is longer: approximately 40 milliseconds. The second (auxiliary) output is live only when AC is available on the input of the Quattro. Loads that should not discharge the battery can be connected to this output. Virtually Unlimited Power Thanks to Parallel and Three-Phase Operation Up to 6 Quattros can operate in parallel to achieve a higher power output. In addition to parallel connections, three units of the same model can be configured for three-phase output. In multi-phase setups, L2 is disabled on all units. On-Site System Configuring, Monitoring and Control Settings can be changed in a matter of minutes with the VictronConnect app or VEConfigure software (computer or laptop and MK3-USB interface are needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, and Digital Multi Control Panel. Remote Configuration and Monitoring Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed. Specifications: PowerControl & PowerAssist: Yes (on L1 input) Transfer Switch: 50 A Maximum AC Input Current: 50A (each leg) Inverter Specifications: DC Input Voltage Range: 9.5-17V Output When in Inverter Mode: Output voltage: 120 Vac ± 2% / Frequency: 60 Hz ± 0.1% (1) Cont. Output Power at 25°C: 3000 VA Cont. Output Power at 25°C: 2400 W Cont. Output Power at 40°C: 2200 W Cont. Output Power at 65°C: 1700 W Maximum Apparent Feed-in Power: 2500 VA Peak Power: 5500 W Maximum Efficiency: 93% Zero Load Power: 15W Zero Load Power in AES Mode: 10W Zero Load Power in Search Mode: 4W Charger Specifications: AC Input: Split-phase: 180-280Vac 45 – 65Hz / Single-phase: 90-140Vac 45 – 65Hz Charge Voltage 'Absorption': 14.4V Charge Voltage 'Float': 13.8V Storage Mode: 13.2V Maximum Battery Charge Current: 120A Battery Temperature Sensor: Yes General Specifications: Auxiliary Output: 50 A (each leg) External AC current Sensor (optional): 100A Programmable Relay: Yes Protection: a – g VE.Bus Communication Port: For parallel and three-phase operation, remote monitoring and system integration General Purpose com. Port: Yes, 2x Remote On-Off: Yes Operating Temperature Range: -40 to +65°C (-40 -150°F) Fan assisted cooling Humidity (non-condensing): Max 95% Enclosure Specifications: Material & Color: Steel, blue RAL 5012 Protection Category: IP22 Battery-Connection: 2x2 M8 bolts 120/240 V AC-Connection: Screw terminals 21 mm² (4 AWG) Weight: 32.8 kg / (52 lb) Dimensions (hxwxd): 579 x 319 x 168 mm / (23 x 13 x 7 inch) Standards: Safety: EN-IEC 60335-1, EN-IEC 60335-2-29 Emission, Immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Can be adjusted to 50 Hz Protection key: Output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, 120Vac on inverter output, input voltage ripple too high Non-linear load, crest factor 3:1. Up to 75-degrees F / 25-degrees C ambient temperature Switches off when no external AC source is available. Programmable Relay That Can for Example Be Set for General Alarm or DC under Voltage or Genset Start/Stop Function: AC rating: 120Vac / 4A / DC rating: 4A up to 35dc, 1A up to 60Vdc Use, for example, to communicate with a lithium battery BMS Please contact your dealer for any returns, repairs or support issues related to this product.

Type III/V Work Vest - Orange - Adult Universal   The Mustang Survival MV3192 Type III/V Work Vest is ideal for construction, law enforcement, and other personnel working on or near the water requiring an approved work vest.  Designed to be safe, functional, and comfortable, the MV3192 Work Vest comes with SOLAS reflective tape on the front collar and back for enhanced visibility, a fast tab attachment point for a radio or other equipment, and a comfortable mesh lining.  Side adjustments create a customized fit in a functional universal size. Features: SOLAS reflective tape on collar front and back Fast tab for attaching required equipment  Mesh lining enhances comfort Certifications: U.S.C.G. - UL1123 - Marine Buoyant Devices 160.064 - Type III PFD Style - Wearable Technical Specifications: Color - Orange Size - Universal fit  Chest Size - 30" to 52" (76 to 132 cm) Weight - ≥ 90 lb (40 kg) *Sold as an Individual  WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Classic Flotation Bomber Jacket with Reflective Tape - Orange - Large  Designed to deliver comfort, warmth, and durability during marine operations, the MJ6214 T1 Classic Flotation Bomber Jacket's closed-cell foam insulation will provide flotation and in-water insulation to delay the onset of hypothermia in the event of water immersion.  Coupled with functional design elements such as fleece-lined pockets and a storm flap,  Mustang Survival's MJ6214 T1 Classic Flotation Bomber Jacket adds up to an unbeatable value.  The MJ6214 T1 Version includes SOLAS reflective tape across the chest and around each wrist to provide increased visibility.  Suitable for the requirements of Industrial, Regulatory, and Military environments, the Classic Flotation Bomber Jacket is a standard piece of uniform for many government agencies, as well as everyday recreational activities such as boating, fishing or sailing. Features: Relaxed fit for mobility and comfort 62 square inch of reflective tape Neoprene wrist seals Pen pocket on left sleeve 4 front pockets and 1 large pocket on the inside of the jacket Full-length storm-flap Internal waist belt to reduce ride-up Fleece-lined front pockets Attachable hood can be purchased separately Certifications: U.S.C.G. - UL1123 - Marine Buoyant Devices 160.064 - Type III Technical Specifications: Color - Orange Size - Large Chest Size - 43' to 46" (107 to 117 cm) Weight Capacity - ≥ 90 lb (41 kg) *Sold as an Individual WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

B117 Bronze 0° Depth & Temp with Ray Connector for CP370 & DSM300 The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull. The plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials.  Features: Bronze Housing Depth and Temperature Only Usable Shaft Length: 66.5 mm (2.62”) Replacement nut—405 10 m (33’) cable length Boat Size: 8 m (25’) and up Ideal for center-console and trailered boats Frequency: 50/200 kHz Maximum Depth Range: 50 kHz: 800-1200 ft 200 kHz: 400-700 ft Cone: 50 kHz—45°, 200 kHz—12° RMS Power: 600 W This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

HIT Hydrostatic Inflatable PFD with Sailing Harness - Black - Automatic/Manual  This front entry PFD automatically inflates when submerged in 4” or more water pressure and features an integrated sailing harness for serious sailors.  The lightweight 500D Cordura® outer shell is durable, and the neoprene collar provides all-day comfort.  Heavy-duty stainless steel D-rings built into the front of the vest can attach to safety tethers.  The exclusive Hammar® Hydrostatic Inflator Technology (HIT) deploys only when submerged and not when hit with rain, spray, or humidity.  The SecureZip stays closed during high winds but opens easily on inflation.  A convenient window lets you check the indicator status, and you can also use the manual handle or oral tube to inflate the PFD at any time.  The water-resistant pocket secures and protects your essentials.  A whistle, strobe light holder, and SOLAR reflective tape all ensure additional on-the-water safety. *Upon inflation, it is essential to inspect and re-arm your PFD before next use. Features: Front entry with buckle for convenient donning and doffing Durable 500D Cordura® outer shell with reflective accents Neoprene Comfort Collar prevents chaffing SecureZip closure  Indicator window to check status (green means it's ready to go) Hydrostatic Inflator Technology (HIT) only inflates when submerged in 4” or more of water pressure  Manual inflation handle allows you to inflate the vest at any time Oral inflation tube for backup Water-resistant pocket  Two heavy-duty stainless steel D-rings for use with tethers Includes safety whistle for emergencies SOLAS reflective tape on inflation cell enhances visibility in low light conditions Holder for a strobe light Certifications: U.S.C.G. - Marine Buoyant Devices 160.076 - Type V Recreational  Technical Specifications: Color - Black Inflation - Automatic/Manual CO2 Cylinder Size - 33 gram Size - Universal Adult Chest Size - 30" to 52" (76 to 132 cm) Weight Capacity  - ≥ 80 lb (≥36 kg) *Sold as an Individual  WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HIT Hydrostatic Inflatable PFD w/Sailing Harness - Red/Black - Automatic/Manual This front entry PFD automatically inflates when submerged in 4” or more water pressure and features an integrated sailing harness for serious sailors.  The lightweight 500D Cordura® outer shell is durable, and the neoprene collar provides all-day comfort.  Heavy-duty stainless steel D-rings built into the front of the vest can attach to safety tethers.  The exclusive Hammar® Hydrostatic Inflator Technology (HIT) deploys only when submerged and not when hit with rain, spray, or humidity.  The SecureZip stays closed during high winds but opens easily on inflation.  A convenient window lets you check the indicator status, and you can also use the manual handle or oral tube to inflate the PFD at any time.  The water-resistant pocket secures and protects your essentials.  A whistle, strobe light holder, and SOLAR reflective tape all ensure additional on-the-water safety. *Upon inflation, it is essential to inspect and re-arm your PFD before next use. Features: Front entry with buckle for convenient donning and doffing Durable 500D Cordura® outer shell with reflective accents Neoprene Comfort Collar prevents chaffing SecureZip closure  Indicator window to check status (green means it's ready to go) Hydrostatic Inflator Technology (HIT) only inflates when submerged in 4” or more of water pressure  Manual inflation handle allows you to inflate the vest at any time Oral inflation tube for backup Water-resistant pocket  Two heavy-duty stainless steel D-rings for use with tethers Includes safety whistle for emergencies SOLAS reflective tape on inflation cell enhances visibility in low light conditions Holder for a strobe light Certifications: U.S.C.G. - Marine Buoyant Devices 160.076 - Type V Recreational  Technical Specifications: Color - Red/Black Inflation - Automatic/Manual CO2 Cylinder Size - 33 gram Size - Universal Adult Chest Size - 30" to 52" (76 to 132 cm) Weight Capacity  - ≥ 80 lb (≥36 kg) *Sold as an Individual  WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HIT High Visibility Inflatable PFD - Fluorescent Yellow/Green - Automatic/Manual The MD3183 T3 Inflatable PFD with HIT (Hydrostatic Inflator Technology) is Mustang Survival's top-of-the-line inflatable PFD.  Constructed of ANSI-approved high visibility materials also worn by police, EMS, and traffic controllers the MD3183 T3 is our brightest inflatable yet. The Hydrostatic Inflator Technology offers reliable inflation in a low maintenance design that will only automatically inflate when submerged in 4 or more inches of water and not inadvertently due to rain, spray, or humidity.  Exclusive to Mustang Survival in North America and maintenance-free for 5 years or until inflated.  Made for the most severe marine environments the Inflatable PFD with HIT will meet the challenges of the most demanding users. It also features the SecureZip™ closure system to ensure the PFD will stay closed during even the most rigorous activity and still opens effortlessly upon inflation. This low-profile PFD ensures high visibility and is lightweight and comfortable enough that you'll forget you're wearing a PFD. *Upon inflation, it is essential to inspect and re-arm your PFD before the next use. Features: Auto hydrostatic inflator technology is maintenance-free for 5 years from the date of manufacture Bright fluorescent yellow-green inflation cell for improved in-water visibility Status indicator window - green means it's ready to go The cylinder is contained inside the bladder to protect against corrosion High visibility ANSI-approved fluorescent yellow cover 64 sq. in. of ANSI reflective tape Backflap with reflective tape SecureZip™ closure Lightweight and comfortable design Strobe light holder, safety whistle and SOLAS reflective tape on bladder Backup oral inflation tube D-ring for kill-switch attachment Neoprene Comfort Collar™ Certifications: U.S.C.G. - Marine Buoyant Devices 160.076 - Type II Recreational U.S.C.G. - Marine Buoyant Devices 160.076 - Type V Commercial Technical Specifications: Color - Fluorescent Yellow/Green Inflation - Automatic/Manual CO2 Cylinder Size - 33 gram Size - Universal Adult Chest Size - 30" to 52" (76 to 132 cm) Weight Capacity  - ≥ 80 lb (≥36 kg) *Sold as an Individual    WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HIT Inflatable PDF with SOLAS Reflective Tape - Orange/Black - Automatic/Manual  The award-winning MD3183 T2 Deluxe Inflatable PFD with HIT (Hydrostatic Inflator Technology) is Mustang Survival's top-of-the-line inflatable PFD.  Designed for serious users with exclusive technology that enhances safety and minimizes maintenance, this is our most popular inflatable PFD.   The MD3183 T2 version features 64 square inches of SOLAS reflective tape on the outer shell and back flap.  The Hydrostatic Inflator Technology offers reliable inflation in a low maintenance design that will only automatically inflate when submerged in 4 or more inches of water and not inadvertently due to rain, spray, or humidity.  Exclusive to Mustang Survival in North America and maintenance-free for 5 years from the date of manufacture or until inflated.  Made for the most severe marine environments the Deluxe Inflatable PFD with HIT will meet the challenges of the most demanding users. It also features the patented SecureZip™ closure system to ensure the PFD will stay closed during even the most rigorous activity and still opens effortlessly upon inflation. *Upon inflation, it is essential to inspect and re-arm your PFD before the next use. Features: 64 square inches of SOLAS reflective tape Low maintenance Hydrostatic Inflator Technology only inflates when submerged in water, minimizing accidental inflation. The inflator is maintenance-free for 5 years from the date of manufacture.  The cylinder is contained inside the bladder to protect against corrosion Lightweight and comfortable design Durable 420-Denier nylon and heavy duty polyurethane coated nylon Strobe light holder, safety whistle and SOLAS reflective tape on badder Backup oral inflation tube D-ring Neoprene Comfort Collar™ Certifications: U.S.C.G. - Marine Buoyant Devices 160.076 - Type II Recreational U.S.C.G. - Marine Buoyant Devices 160.076 - Type V Commercial Technical Specifications: Color - Orange/Black Inflation - Automatic/Manual CO2 Cylinder Size - 33 gram Size - Universal Adult Chest Size - 30" to 52" (76 to 132 cm) Weight Capacity  - ≥ 80 lb (≥36 kg) *Sold as an Individual  WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

HIT Inflatable PFD for Law Enforcement - Orange/Black - Automatic/Manual  The award-winning MD3183 LE Inflatable PFD with HIT (Hydrostatic Inflator Technology) is Mustang Survival's top-of-the-line inflatable PFD.  Designed for serious users with exclusive technology that enhances safety and minimizes maintenance, this is our most popular inflatable PFD. The Hydrostatic Inflator Technology offers reliable inflation in a low maintenance design that will only automatically inflate when submerged in 4 or more inches of water and not inadvertently due to rain, spray, or humidity. E xclusive to Mustang Survival in North America and maintenance-free for 5 years from the date of manufacture or until inflated. Made for the most severe marine environments the Inflatable PFD with HIT will meet the challenges of the most demanding users. It also features the patented SecureZip™ closure system to ensure the PFD will stay closed during even the most rigorous activity and still open effortlessly upon inflation.  The MD3183 LE includes a back flap that can be silkscreened with your department identification.  This low-profile PFD is designed to be worn in conjunction with Personal Protective Equipment (PPE) and is lightweight and comfortable enough that you'll forget you're wearing a PFD. *Upon inflation, it is essential to inspect and re-arm your PFD before next use. Features: Low maintenance Hydrostatic Inflator Technology only inflates when submerged in water, minimizing accidental inflation Inflator is maintenance-free for 5 years from date of manufacture Status indicator window: green means it's ready to go Cylinder is contained inside bladder to protect against corrosion Identify your department with custom silk screened backflap SecureZip™ closure Lightweight and comfortable design Durable 420-Denier nylon and heavy duty polyurethane coated nylon Strobe light holder, safety whistle and SOLAS reflective tape on bladder Backup oral inflation tube D-ring for kill-switch attachment Neoprene Comfort Collar Certifications: U.S.C.G. - Marine Buoyant Devices 160.076 - Type II Recreational U.S.C.G. - Marine Buoyant Devices 160.076 - Type V Commercial Technical Specifications: Color - Orange/Black Inflation - Automatic/Manual CO2 Cylinder Size - 33 gram Size - Universal Adult Chest Size - 30" to 52" (76 to 132 cm) Weight Capacity  - ≥ 80 lb (≥36 kg) *Sold as an Individual  WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Essential Rain Jacket - 2X-Large - Grey Features: Waterproof Breathable Windproof Attached hood with drawcord adjustment Zippered front with internal storm flap Two lower pockets with waterproof zippers Adjustable bottom hem with drawcord Elastic wrist cuffs Inner mesh lining

Superior Smoke Blue Monofilament - 40lb - 370 yds Sufix Superior has superior strength, durability, and fast recovery for a high level of performance. Superior mono rated top line by "The Professional's of Sport Fishing Magazine" for 130 lb. class. It is incredibly strong, Superior line and leaders rank among the highest in tensile strength. As well as being incredibly tough and abrasion resistant it has controlled stretch for fast recovery and excellent hook setting power. Features: Superior mono Incredibly strong - Superior line and leaders rank among the highest in tensile strength Incredibly tough and abrasion-resistant Controlled stretch for fast recovery and excellent hook setting power WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.