5142 70AMP MAXI Fuse Features: Economical Tin-plated connector blades for corrosion resistance Visible indication of blown condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

5143 80AMP MAXI Fuse Features: Economical Tin-plated connector blades for corrosion resistance Visible indication of blown condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GP1514 SystemPod Pre-Cut for Raymarine es75/es77/es78 & 1 Instrument for 9.5" Wide Guard Instrument Cut Out Size:3.6" Hole GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuard. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods. *See Literature tab for an image with dimensions

GP2514 SystemPod Pre-Cut for Raymarine es75/es77/es78 & 1 Instrument for 12" Wide Guard Instrument Cut Out Size:3.6" Hole GP2500 Series for 12" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

5141 60AMP MAXI Fuse Features: Economical Tin-plated connector blades for corrosion resistance Visible indication of blown condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Self-Locking Bow Shackle - Diameter 12mm - 15/32" Features: Self-locking bow shackle forged in grade 316L stainless steel The pin is locked into one of the indentations No risks of loosening due to vibrations Outstanding working and breaking loads WLL: only for industrial applications (lifting i.e…) CE marking and batch number Applications: To be used when ample room is required Possibility to attach several lines or cables Specifications: Materials 316 stainless steel grade Working load (lb) 4580 WLL (lb) 2640 Breaking load (lb) 13220 Weight (lb) 0.514 Dimensions (see 2nd image): A (inch) 2-11/64" B (inch) 15/16" C (inch) 15/32" D (inch) 15/16" D diameter (inch) 15/32" E (inch) 25/64" M (inch) 2-31/64"

HR Quick Release Snap Shackle With Swivel Eye -110mm Length- 4-21/64" Features: HR forged (17.4 PH) quick-release snap shackle with swivel eye The opening is made by pulling the lanyard Perfect to attach one sheet or halyard Outstanding working and breaking loads Free rotation of the snap shackle thanks to the swivel Applications: For spinnaker operations Perfect for spinnaker sheets and halyards Specifications: Materials: HR 17.4 PH stainless steel grade Working load: (lb) 5290 / (kg) 2400  Breaking load: (lb) 9250 / (kg) 4200  Weight: (lb) 0.514 / (g) 233 Dimensions: A: (inch) 63/64" / (mm) 25   B: (inch) 5/8" / (mm) 16  Length: (inch) 4 21/64" / (mm) 110  Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 High Resistance (HR) *Sold as an Individual

Square Post Clamp Base 3" Wide with 1.5" Ball The RAM-247U-3 is a clamp base with 1.5" rubber ball that will connect to rails up to 3" maximum in width.  Features: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.9 lbs.

Bus Cable - 5M for AcquaLink® Gauges VDO Marine Bus Cable - 5M. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Square Post Base Clamp 5" Wide with 1.5" Ball The RAM-247U-5 is a clamp base with 1.5" rubber ball that will connect to rails up to 5" maximum in width.  Features: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.6 lbs.

RAM 75mm x 75mm VESA 3.625" Plate w/ 2.25" Diameter Ball This RAM-D-2461U consists of a 2.25" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. The

Square Post Clamp Base 4" Wide with 1.5" Ball The RAM-247U-4 is a clamp base with 1.5" rubber ball that will connect to rails up to 4" maximum in width.  Features: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.17 lbs.

Profile P1120 Tri-Light Surface Light - Red, Warm White & Blue - Brushed Nickel Finish 3 Colors with Only 2 Wires Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture. Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch 3 colors, 1 fixture Simple 2 wire hookup Color: Red, White & Blue 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Square Post Clamp Base for Posts Up To 1.5" Wide The RAM-247U-15 consists of a 1.5" clamp base with 1.5" ball.  Features: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Weight: 0.45 lbs

Square Post Clamp Base 2" Wide with 1.5" Ball The RAM-247U-2 consists of a 2" clamp base with 1.5" ball.  Features: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.49 lbs.