|
Ocean Flat Base - Size 60 Hatch
With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face.
Features:
Friction levers hold the lid open in any position up to 95°
Anodized aluminum frame for corrosion resistance
All sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit, and Transom)
Specifications:
Lower Frame: Flat base
Acrylic Color: Smoke grey
Hatch Weight: 8 kg /17.6 lb.
Acrylic Window Thickness: 12mm / (1/2 in.)
Length: 574 mm / 22 5/8 in.
Width: 574 mm / 22 5/8 in.
Height: 43 mm / (1-11/16 in.)
Radii: 76 mm / 3 in.
Hinge Width: 367 mm / (14-7/16 in.)
Cut-Out Length (Flat/Flange): 502 mm / (19-3/4 in.)
Cut-Out Width (Flat/Flange): 502 mm / (19-3/4 in.)
Cut-Out Radii (Flat/Flange): 40 mm / (1-9/16 in.)
*Sold as an Individual
|
|
|
ShadeFin Fixed Clamp-On Mount
For boats with minimal or no rod holders, mount your ShadeFin to 3/4" or 1" schedule-40 pipe or 1-1/4" O.D. tube with the Fixed Clamp-On Mount. This is a secure and economical mount manufactured from Type-316L polished stainless steel. It's easy to install and comes with a guide notch for accurate ShadeFin placement.
Features:
Easily installed on your existing T-top piping
Polished, Type-316L stainless steel
Includes self-aligning notch and pin-locking hole
Made in the USA
1-year limited warranty
|
|
|
HELIX 9® CHIRP MEGA DI+ GPS G4N CHO Display Only
The HELIX 9 CHIRP MDI+ GPS G4N CHO features a 9" display, MEGA Down Imaging+, Dual Spectrum CHIRP Sonar and internal GPS with Humminbird Basemap. As with all HELIX G4N models, this HELIX 9 includes standard features such as AutoChart Live, Wi-Fi and NMEA 2000®, in addition to Bluetooth® and Ethernet networking for compatibility with the One-Boat Network™ family of products from Humminbird, Minn Kota and Cannon. This CHO (Control Head Only) model allows you to pick the right accessory transducer for your needs, including compatibility with Minn Kota Built-in MEGA Imaging trolling motors.
Features:
Control Head Only Model: This model does not include a transducer. This CHO model is a great choice for those looking to connect to connect to Built-in MEGA Imaging on Minn Kota trolling motors, accessory transducer options like MEGA 360 Imaging, or share sonar data from an existing Humminbird Ethernet network.
Keypad control: Master HELIX at the touch of a button. Access the preloaded views from the user-friendly menu system, operated by soft key controls that allow you to reliably operate your fish finder in any condition.
MEGA Down Imaging+: Get unprecedented underwater clarity with Down Imaging coverage down to 200 feet below your boat. You'll unlock more fish and structure with 20% more detail and 60% more depth capability than MEGA Down Imaging sonar.
Dual Spectrum CHIRP sonar: Before you cast, know what's down there thanks to highly-detailed fish arches and a clear view of fish-holding structure and the bottom. Powered by our proprietary, Low-Q CHIRP transducer, Dual Spectrum offers two ways to search; Wide Mode for maximum coverage and Narrow Mode for focusing on the slightest detail.
Internal GPS and Humminbird Basemap: Our enhanced basemap provides you with a clear view of underwater terrain and surrounding points of interest so you can fish and navigate with total confidence. Identify buoys, day markers, hazards, marinas, contours, depth markers and much, much more. Includes charts of more than 10,000 lakes, plus coastal coverage for the continental U.S.
Premium Chart Compatible: Humminbird provides the most complete offering of premium chart options to anglers everywhere. Get a complete view of the world below with optional charts from Humminbird's LakeMaster® and CoastMaster™ products, as well as your choice of compatible Navionics® charts.
AutoChart Live: Create real-time maps of your fishing spots, with access to patented Humminbird® LakeMaster® features. Map depth contours, bottom hardness and vegetation as you drive your boat. Comes standard with eight (8) hours of built-in recording time and is compatible with AutoChart Zero Line SD cards for virtually-endless AutoChart Live mapping capacity.
One-Boat Network Compatible: Many Humminbird models seamlessly integrate and communicate with Minn Kota and Cannon products to unlock more features and capabilities for anglers everywhere. Make the more of your time on the water with the exclusive boat control and fish-catching features of the One-Boat Network.
Ethernet Networking: High-speed Ethernet allows you to build a powerful, professional-grade fishing system. Easily connect multiple fish finders, or upgrade to add-on technologies like Minn Kota i-Pilot Link and Humminbird CHIRP Radar.
Bluetooth: Take control right from the screen of your Humminbird with wireless communication to compatible Talon and Raptor shallow water anchors, as well as Cannon Optimum downriggers. Additional features include wireless software updates from the Humminbird FishSmart App and display of smart phone notifications on your Humminbird.
NMEA 2000 networking built-in: Connect an accessory NMEA 2000 network to your control head for even more information; from boat performance to weather and water conditions, make sense of it all with NMEA 2000 networking.
Includes control head, power cable, gimbal mounting bracket. This CHO model does not include a transducer, allowing you to pick the best fit for your rigging needs.
2-Year Limited Warranty
|
|
|
ShadeFin Adjustable Clamp-On Pipe Mount
For boats with limited or no rod holders, the Adjustable Clamp-On Pipe Mount is a great solution for secure placement of ShadeFin. This mount fits 3/4" or 1" schedule-40 pipe or 1-1/4" O.D. tube. Once this mount is secured to your desired location, easily adjust the angle of ShadeFin using the soft-touch knob for hours of sun protection while on the water.
Features:
Manufactured from Type-316L stainless steel
Features soft-touch knob for easy and secure angle adjustment
Adjusts every 15º with safety detents
Attaches to 3/4" or 1" pipe or 1-1/4" tube
Includes self-aligning notch and pin-locking hole
1-year limited warranty
|
|
|
Marine Outboard Motor Bracket - Aluminum - Fixed 25HP
Features:
The fixed kicker motor bracket is designed for adjustable mount on the transom. Designed for the heavier 4-stroke motors.
5" height adjustment will accommodate long- and short-shaft motors.
8 1/2” setback - weighs 13lbs.
|
|
|
3-3/8" (85MM) ViewLine Tachometer with Multi-Function Display - 0 to 8000 RPM - Black Dial & Bezel
The ViewLine Tachometer is available with or without operating hours counter (digital display) and can be connected to conventional marine engines (no data bus).
One LED warning light is integrated as a standard.
Specifications:
Various sensor inputs (W, Ind, Hall, Generator)
Output for acoustic alert (option)
LCD size - 37 mm x 11 mm
8 and 14 pole Tyco / Hirschmann bush housing • Operating voltage 8 – 32 V
Accuracy +/- 2.5 % of full scale reading
< 175 mA current consumption with an LED warning light as standard
Number of pulses programmable via dip switch or PC software (ViewLine programming tool)
Anti-fog double lens
Protection rating front IP67, rear IP52
85 mm installation diameter
50 mm installation depth •
Operating temperature range -20 °C / +70 °C
Reverse polarity protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
|
|
Mount 1" Tough-Ball™ with M6-1X6mm Male Threaded Post
RAM Mount's Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability allows for a multitude of real world, and out of this world, applications. With so many of the things we use incorporating threads and fasteners, there really is no limit to the number of uses you?ll find for the RAM Tough-Ball™.
The RAP-B-379U-M616 consists of a 1" diameter rubber ball, connected to a M6-1 X 6MM male threaded post.
Metric Thread Diameter and Pitch Options:
M6-1 X 6MM
Material:
High Strength Composite & Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.06 lbs.
|
|
|
NavPilot 300 Yamaha HelmMaster Autopilot Package
Steer By Wire for Yamaha Helm Master
The NavPilot 300-HM is a complete NavPilot 300 system with all of the necessary components, cables and gateways to connect to a Yamaha Helm Master system (not included).
What's in the Box?
FAP-3011 - 4.1" Color LCD
GC-001 - Gesture Controller
FAP3012 - Processor Unit
PG700 - Fluxgate Magnetic Sensor With Enhanced Stability By A Solid-State Rate Gyroscope, w/ 6M Cable
AIR-335-792 - NMEA2000 Micro Terminator
AIR-335-791 - NMEA2000 Micro Terminator
AIR-052-531 - NMEA2000 T-Connector, Female/Female/Male x 3
FAP-YGW-CBL - FAP63XX Y SPLIT MULTILINK CBL
DOC-300-YHM - NavPilot 300-HM Document
NavPilot 300 is not your ordinary Autopilot
The NavPilot 300 is a revolutionary autopilot. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This results in a streamlined, simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 provides unmatched outboard Autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, with one to four outboard engines, where it achieves precise course control from slow trolling to speeds of well over 60 knots.
Gesture Control - just push, point and shoot!
The Gesture Controller is a revolutionary and unique way to steer your boat remotely. By using Bluetooth signals, it is possible to control the Autopilot from anywhere on the boat within 10 meters. Just push, hold the button, point to the desired heading and release to let the Autopilot redirect the boat!
(Note: A Furuno PG700, SC33 or other compatible NMEA2000 vessel heading source is required.)
Versatile Display Modes on a vivid 4.1" Color LCD Display
The SABIKI™ mode lets the autopilot control while you are drifting astern, so you can focus on fishing instead of steering. Maintaining heading astern while compensating for wind and tide, SABIKI™ mode is uniquely tailored for Sabiki fishing, jigging and bottom fishing.
Other display modes include Furuno's Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user selected distance. These include Zig-Zag, Orbit, Figure 8, or a Spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).
Integrate your helm with NavPilot's FishHunter mode
FishHunter mode is a unique feature of FURUNO’s NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB).
Furuno Fantum Feedback
With Fantum Feedback, NAVpilot outboard/sterndrive installations no longer require use of a physical rudder feedback unit. NAVpilot software clears the path to a simplified installation, while also delivering enhanced steering control.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
|
|
VMHU Mast Cable - 36m
B&G 36 meter (118') cable for vertical arm masthead units.
|
|
|
U.S. East Coast, Bahamas & Bermuda - Vector Charts & Standard Resolution Satellite Photos for Bahamas - Unlock Code
**SYSTEM ID NUMBER IS REQUIRED TO RECEIVE AN UNLOCK CODE**
This Chart Pack includes vector charts for United States East Coast, Bahamas and Bermuda, plus standard resolution satellite photography for the Bahamas.
These C-MAP charts are comprised of the same cartographic chart information found in C-MAP MAX and C-MAP MAX PRO charts.
Note that you will need to purchase an unlock code to view this chart data.
To purchase this chart pack for NavNet 3D, TZT or TZT2, you will need to provide your NavNet system ID to your local authorized Furuno dealer. The system ID can be located under the “My NavNet” menu.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
|
|
HOOK²-4X GPS 4" Fishfinder GPS TrackPlotter All Season Pack
HOOK2-4x GPS All Season Pack The world’s easiest fishfinder, HOOK2 4x GPS Bullet offers simple menus, easy access to key functions and Autotuning sonar. Powered by proven Lowrance® performance, HOOK2 4x GPS features wide-angle, Broadband sonar coverage, plus a simple and accurate GPS Plotter. Just plug it in and fish, it's that easy.
4-inch SolarMAX™ Screen
Get crisp and clear views of fish and fish-holding structure with the excellent clarity and daylight visibility of a high-resolution SolarMAX™ display.
Automated sonar settings
You will spend more time fishing and less time dialing in your sonar with HOOK2 Autotuning sonar. Just plug it in and fish. It doesn't get any easier.
Easiest-to-use menu operation and Dedicated Keypad
Make the adjustments you want with fewer key presses via a simplified menu layout and dedicated keypad.
Lowrance® Wide-Angle Broadband sonar
Stay on the fish more easily with proven Lowrance® Broadband sonar, delivering the best traditional sonar views.
Built-in GPS Plotter
Save waypoints, follow trails and navigate to your favorite fishing spot with a simple and accurate GPS Plotter.
Easy front-dash or quick-release bracket mounting installation
Pick the best installation option for your boat from simple flush-mount and quick-release-bracket installation options.
Key Features of All Season Pack:
Portable pack with two integrated mounts for the Hook2-4x GPS fishfinder
12V battery and charger
Wide Angle 200 kHz Skimmer® transducer with power cable
Suction-cup transducer mount
Ice transducer with with float and power cable
Two Stowaway® utility boxes
Specifications:
Display Size: 4.3" (109mm)
Display Resolution: 480 x 272
Display Type: Color TFT
Sonar Frequency: 200 kHz
Sonar Max Power: 200W RMS
Sonar Max Depth: 500' (152m)
Sonar Alarm: Shallow, Fish, Depth
GPS Type: Internal high-sensitivity WAAS + EGNOS + MSAS
Power Supply: 10-17 vDC (12V systems)
Waterproof: Yes
Width: 6.5" (165mm)
Height: 3.8" (96mm)
Depth: 3.3" (84mm)
Comes With:
000-14170-001 HOOK2 4 - 5" Bracket
000-14027-001 - Bullet Skimmer Transducer
000-14192-001 - Bullet/SplitShot Transom Bracket
000-0127-50 - Fuse & Fuse Holder
|
|
|
Strap Clamp Roll Bar Mount w/Standard Length Double Socket Arm & 2.5" Round Base with 1/4"-20 Male Threaded Post
The RAM-B-149Z-2-202AU consists of a steel strap base, u-bolt bases, double socket arm and 2.5" dia. round base with 1/4"-20 threaded post. Designed for a clean installation, the included roll bar base accommodates most common tubing sizes on UTV's and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap clamp in a compact housing, you won't have to worry about exposed sharp edges or unwanted loosening. The camera base contains a 1" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
|
|
1" Ball Mount with Custom GoPro® Hero Adapter
The RAM-B-138-GOP1U consists of a 2.5" diameter round base with the universal AMPS hole pattern, STANDARD size double socket arm and 1" diameter ball with custom GoPror Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM-B-138-GOP1 can be used as a drill-down or a temporary, removable mounting solution with the addition of the RAP-339U accessory. The GoPror Hero adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. GoPro camera and black thumb screw not included with purchase.
|
|
|
Suction Cup Mount with Short Arm
The RAM-166-B-202U consists of a suction cup mount with short arm. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.
|
|
|
No-Drill™ Laptop Mount Vehicle System for '17-20 Ford F-Series + More
This RAM® No-Drill™ laptop stand system installs quickly and easily into a variety of Dodge, Ford, and Jeep vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.
Features:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: None. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Material: High Strength Composite and Powder Coated Steel
Custom, No-Drill™ mounting base offers lowest profile in the industry
Ball and socket mounting system offers shock and vibration dampening
Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry
Combination Telescoping pole adjusts both height and swing with one knob
Modular system makes changing your vehicle, or your device, simple and cost effective
Ability to mount laptops, tablets and other devices using the same mounting system
Universal Laptop Tray accommodates most laptops
Compatible Devices
10" to 16" Wide Laptops & (17" Wide Screens)
Compatible Vehicles
Dodge
Journey (2011-2020)
Ford
F-150 (2015-2020)
F-250-F-550 (2017-2020)
Escape (2013-2019)
Expedition (2018-2021)
Transit Connect (2014-2021)
C-Max (2014-2018)
Focus (2011-2018)
Raptor (2015-2020)
Jeep
Compass (2013-2021)
Patriot (2013-2017)
|
|